Hitachi ZX200-3: complete spec sheet
The Hitachi ZAXIS 200-3 is a 20-ton class hydraulic excavator weighing 47,015 lb (21,326 kg), powered by a 159 hp (118 kW) Isuzu turbo diesel. With its 0.91 m3 (1.19 cu. yd.) backhoe bucket, it digs down to 20 ft 3 in (6.18 m), dumps as high as 22 ft 5 in (6.83 m) and delivers 29,099 lb (129.4 kN) of bucket digging force with power boost. The workhorse of civil engineering, deep excavation and truck loading.
Hitachi ZX200-3 specifications
All figures below come from the official Hitachi ZAXIS 200-3 / 200LC-3 brochure, available as a PDF download.
| Operating weight (ZX200-3) | 47,015 lb (21,326 kg) |
|---|---|
| Backhoe bucket capacity | 1.19 cu. yd. (0.91 m3) |
| Counterweight | 10,463 lb (4,750 kg) |
| Drawbar pull | 45,620 lb (20,711 kg) |
| Off-level capacity | 70% (35°) |
| Maximum dig depth | 20 ft 3 in (6.18 m) / 21 ft 11 in (6.68 m) |
|---|---|
| Dig depth, 8-ft flat bottom | 19 ft 6 in (5.95 m) / 21 ft 4 in (6.50 m) |
| Maximum cutting height | 31 ft 9 in (9.67 m) / 32 ft 11 in (10.04 m) |
| Maximum dump height | 22 ft 5 in (6.83 m) / 23 ft 7 in (7.18 m) |
| Minimum swing radius | 10 ft 9 in (3.28 m) / 10 ft 5 in (3.18 m) |
| Maximum vertical wall | 17 ft 5 in (5.30 m) / 19 ft 8 in (5.99 m) |
| Bucket digging force (power boost) | 29,099 lb (129.4 kN) |
| Lift over front, ground level, 20 ft reach (power boost) | 14,607 lb (6,632 kg) |
| Engine | Isuzu AH-4HK1, EPA Tier 3, 4-cylinder turbo, 5.193 L, air-to-air charge cooler |
|---|---|
| Net power | 159 hp (118 kW) @ 2,000 rpm |
| Main pumps | 2 variable-displacement axial-piston, 2 x 56 gpm (2 x 212 L/min) |
| Implement circuit pressure | 4,980 psi (34,336 kPa); power boost 5,270 psi (36,335 kPa) |
| Travel speed (low / high) | 2.2 / 3.4 mph (3.5 / 5.5 km/h) |
| Swing speed / torque | 13.3 rpm / 50,662 lb-ft (68,900 Nm) |
| Fuel tank | 106 gal (400 L) |
| Hydraulic system capacity | 63.4 gal (240 L) |
| Track rollers per side | 7 / 8 |
|---|---|
| Shoes per side | 46 / 49 |
| Ground pressure, 32-in (800 mm) shoes | 5.07 psi (35 kPa) / 5.29 psi (36.5 kPa) |
| Track chain | Sealed and lubricated, hydraulic adjustment |
What the ZX200 is used for
The ZX200 class is the reference machine for civil engineering and infrastructure work: deep sewer and watermain trenches, building foundations, mass excavation, riprap placement and truck loading. Its 400 L fuel tank runs long shifts, and its power boost mode pushes hydraulic pressure to 5,270 psi when the bucket meets hard ground. Benco is a Hitachi dealer: sales, parts and service on site in Richelieu.
Hitachi sales, parts & service at Benco
Looking for a ZX200 or another Hitachi excavator? Benco sells new and used Hitachi machines, stocks parts and services them in Richelieu. For jobsite needs, see machinery rental and rental rates, or call 450 658-1802.
Looking for a Hitachi excavator?
Sales, parts and service in Richelieu — reply within 24 hours.
(450) 658-1802 Get a quoteFrequently asked questions — Hitachi ZX200
How much does a Hitachi ZX200 weigh?
The Hitachi ZAXIS 200-3 weighs 47,015 lb (21,326 kg) with full fuel, operator, 0.91 m3 heavy-duty bucket, 2.91 m arm and 4,750 kg counterweight. It's a 20-ton class excavator: hauling it requires a lowboy and the corresponding permits.
What is the dig depth of the ZX200?
The ZX200-3 digs down to 20 ft 3 in (6.18 m) with the standard arm and down to 21 ft 11 in (6.68 m) with the long arm. Its maximum cutting height reaches 31 ft 9 in (9.67 m) and its dump height 22 ft 5 in (6.83 m), enough to load the tallest boxes.
What engine powers the Hitachi ZX200-3?
The ZX200-3 runs an EPA Tier 3 certified Isuzu AH-4HK1: 4 cylinders, 5.193 L, turbocharged with air-to-air charge cooling, producing 159 hp (118 kW) at 2,000 rpm. The 106 gal (400 L) fuel tank supports long days without refueling.
What's the difference between the ZX200-3 and the ZX200LC-3?
LC stands for Long Crawler: the ZX200LC-3 has a longer undercarriage (8 track rollers per side versus 7, 49 shoes versus 46), which increases stability and over-side lift capacity. Digging performance and engine are identical; the LC is preferred for lifting work and soft ground.
Does Benco sell and service Hitachi excavators?
Yes. Benco is a Hitachi dealer with parts and service on site in Richelieu, plus new and used excavator sales. For a one-off jobsite need, rental with or without an operator is also available, with delivery across the South Shore and Montérégie.